|
|
|
Coming in 2007!
Studio Quality Audio to Ethernet Converter
The Hi-Fi Audio™ tranceiver from Adaptive Micro-Ware is capable of full duplex transmission
of high fidelity audio across T-1 or wireless Ethernet devices. No CPU or associated PC device is required.
Because the device acts as a physical audio pass-through, no special configuration or set-up is required. The Hi-Fi
AudioTM transceiver readily connects to studio equipment via XLR connectors and is capable of both
analog and digital (AES) I/O.
Approved for use with Dolby systems, the Hi-Fi Audio™ transceiver can provide the necessary
link for radio broadcasters to supply high quality audio programming to affiliate stations without monthly fees.
Utilizing technologies like the Canopy Wireless Broadband Platform, studio quality audio can be inexpensively
delivered up to 35 miles away.
front view
rear view
SPECIFICATIONS
Functions
 | No Compression |
 | Real Time Transmission < 10 ms |
| Full Duplex Audio Transmission |
| Balanced Analog Audio Interfaces |
Audio inputs
| Digital Audio Input (AES) at 32 kHZ, 44.1 kHz or 48 kHz with an impedance level of 110 Ohms balances line.
Female XLR |
| Digital Audio Input (AC3) Dolby Digital at 32kHz, 44.1 kHz or 48 kHz. Female XLR |
Audio Outputs
| Digital Audio Output (AES), clock set by dipswitch for 32 kHz, 44.12 kHz, 48kHz or the reference clock from an
external source. |
| Digital Audio Output (AC-3) Dolby Digital, will be at the same rate as Digital Audio Input |
Analog Input
| A XLR Connector for left and right channels at a rate of 32 kHz, 44.1 kHz or 48kHz |
Analog Output
| A XLR connector for left and right channels at a rate of 32 kHz, 44.1 kHz or 48kHz |
| Control and Setup Port |
User Interface
| Dip switch settings for user control |
| Front Panel LED Indicators |
| Power, Digital Input Active, External Clock Active, 32 kHz rate indicator, 44.1 kHz rate Indicator, 48 kHz
rate Indicator, Run, Error, Network Ready, Connected, Audio TX, Audio RX, Analog/ Digital switch, External or
Internal Clock switch |
Physical
| 16.75" x 8" x 2" |
Power Input
| 120-VAC input, +/-10% |
| In-line style supply provides 9-VDC output to unit |
Environmental
| Operating temperature: 0ºC (32ºF) to 50ºC (122ºF) ambient |
| Storage/non-operating temperature: -30ºC (-22ºF) to +80ºC (176ºF) |
| Humidity, operating and storage: 95% non-condensing |
Audio Information
| Audio Bandwidth 20hz-22kHz |
| Delay <0.1ms |
| Linear Phase Response |
| Dynamic Range 100dB |
| Unweighted Noise –96 dB |
|
|
